348
802.1x Commands
Default Configuration
Period set to 30 seconds.
Command Mode
Interface configuration (Ethernet) mode
User Guidelines
• The default value of this command should be changed only to adjust to unusual
circumstances, such as unreliable links or specific behavioral problems with certain clients.
Examples
The following example sets the time for the retransmission of an EAP-request frame to the client,
to 3600 seconds.
dot1x timeout server-timeout
The
dot1x timeout server-timeout
Interface Configuration mode command sets the time that the
Ethernet Switch Module waits for a response from the authentication server. Use the
no
form of
this command to return to the default setting.
Syntax
dot1x timeout server-timeout
seconds
no dot1x timeout server-timeout
•
seconds —
Time in seconds that the Ethernet Switch Module waits for a response from
the authentication server. (Range: 1 - 65535 seconds)
Default Configuration
Period set to 30 seconds.
Command Mode
Interface configuration (Ethernet) mode
User Guidelines
• The actual timeout is the minimum between the
dot1x timeout server-timeout
value and the
multiplication of RADIUS retransmit and RADIUS timeout.
console(config-if)
#
dot1x timeout supp-timeout
3600
Summary of Contents for PowerConnect 5316M
