224
SNMP Commands
Default Configuration
SNMP traps is enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the command to enable SNMP traps.
snmp-server trap authentication
The
snmp-server trap authentication
Global Configuration mode command enables the Ethernet
Switch Module to send Simple Network Management Protocol traps when authentication fails. To
disable SNMP authentication failed traps, use the
no
form of this command.
Syntax
snmp-server trap authentication
no snmp-server trap authentication
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the command to enable authentication failed SNMP traps.
snmp-server host
To specify the recipient of Simple Network Management Protocol notification operation, use the
snmp-server host
global configuration command. Use the
no
form of this command to remove the
specified host.
console(config)#
snmp-server enable traps
console(config)#
snmp-server trap authentication
Summary of Contents for PowerConnect 5316M
