IGMP Snooping Commands
131
Syntax
ip igmp snooping host-time-out
time-out
no ip igmp snooping host-time-out
•
time-out
— Host timeout in seconds. (Range: 1 - 2147483647)
Default Configuration
The default host-time-out is 260 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
The timeout should be at least greater than 2*query_imax_response_time of the
IGMP router.
Example
The following example configures the host timeout to 300 seconds.
ip igmp snooping mrouter-time-out
The
ip igmp snooping mrouter-time-out
Interface Configuration (VLAN) mode command
configures the mrouter-time-out. The
ip igmp snooping mrouter-time-out
command is used for
setting the aging-out time after multicast router ports are automatically learned. To configure the
default mrouter-time-out, use the
no
form of this command.
Syntax
ip igmp snooping mrouter-time-out
time-out
no ip igmp snooping mrouter-time-out
•
time-out
— Multicast router timeout in seconds (Range: 1 - 2147483647)
Default Configuration
The default value is 300 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
console(config)#
interface vlan
2
console(config-if)#
ip igmp snooping host-time-out
300
Summary of Contents for PowerConnect 5316M
