Dell PowerConnect 5316M, Reference Manual

Page: 84 / 378

64
Address Table Commands
Syntax
port security
[
forward
|
discard | discard-shutdown
] [
trap seconds
]
no port security
•
forward
— Forwards frames with unlearned source addresses, but does not learn the
address.
• discard — Discards frames with unlearned source addresses. This is the default if no
option is indicated.
• discard-shutdown — Discards frames with unlearned source addresses. The port is also
shut down.
• seconds — Sends SNMP traps and defines the minimal amount of time in seconds
between two consecutive traps. (Range: 1 - 1000000)
Default Configuration
Disabled - No port security
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
• Multiple hosts must be enabled see "dot1x multiple-hosts".
Example
In this example, the port g12 is locked for learning, but continues to forward all packets received,
with traps being sent every 100 seconds if a packet with an unkown source address is received.
port security routed secure-address
The port security routed secure-address Interface Configuration (Ethernet, port-channel) mode
command adds MAC-layer secure addresses to a routed port. Use the no form of this command to
delete the MAC addresses.
Syntax
port security routed secure-address mac-address
no port security routed secure-address mac-address
• mac-address — Specify a MAC address in the format of xx:xx:xx:xx:xx:xx.
console(config)# interface ethernet g12
console(config-if)# port security forward trap 100