Dell PowerConnect 5316M, Reference Manual

Page: 248 / 378

228
SNMP Commands
Example
The following example configures a new Simple Network Management Protocol (SNMP) group or
a table that maps SNMP users to SNMP views
snmp-server user
To configure a new SNMP Version 3 user, use the snmp-server user global configuration
command. To remove a user, use the no form of the command.
Syntax
snmp-server user username groupname [ remote engineid-string ] [ auth - md5 password | auth-
sha password
|
auth
-
md5-key md5-des-keys
|
auth
-
sha-key sha-des-keys
]
no snmp-server user username [ remote engineid-string ]
•
username
— The name of the user on the host that connects to the agent. (Range: Up to
30 characters)
• groupname — The name of the group to which the user belongs. (Range: Up to 30
characters)
•
remote engineid-string
— Specifies the engine ID of remote SNMP entity to which the
user belongs. The engine ID is concatenated hexadecimal string. Each byte in
hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a
period or colon. (Range: 5 - 32 characters)
• auth-md5 —The HMAC-MD5-96 authentication level. The user should enter password.
• auth-sha —The HMAC-SHA-96 authentication level. The user should enter password.
• password — A password (not to exceed 32 characters) for authentication and generation
of DES key for privacy. (Range: Up to 30 characters)
• auth - md5-key — The HMAC-MD5-96 authentication level. The user should enter
authentication and privacy keys.
• md5-des-keys — Concatenated hexadecimal string of the MD5 key (MSB) and the privacy
key (LSB). If authentication is only required, you should enter 16 bytes, if authentication
and privacy are required, you should enter 32 bytes. Each byte in hexadecimal character
strings is two hexadecimal digits. Each byte can be separated by a period or colon.
(Range: 16 - 32 characters)
• auth - sha-key —The HMAC-SHA-96 authentication level. The user should enter
authentication and privacy keys.
Console (config) # snmp-server group user-group v3 priv read
user-view