Dell Inspiron 8500 Owner'S Manual Download Page 54

Page: 54 / 186

Using Batteries and Module Bay Devices

www

.dell.com | support.dell.com

NOTE:

You do not need

to install the device screw
unless you want to secure
the module inside the
computer for security
purposes.

If the Device Screw Is Not Installed

NOTICE:

To prevent damage to devices, place them in a safe, dry place when

they are not installed in the computer. Avoid pressing down on them or placing
heavy objects on top of them.

Press the device latch release.

Pull the device out of the module bay.

Insert the new device into the bay, and push the device until you feel a

click.

device latch release

Summary of Contents for Inspiron 8500



























































































































































































Search results

Summary of Contents for Inspiron 8500

Reviews:

Related manuals for Inspiron 8500

Brands by name

Popular brands

Dell Inspiron 8500, Owner'S Manual

Search results

Summary of Contents for Inspiron 8500

Reviews:

Related manuals for Inspiron 8500

Brands by name

Popular brands