Dell Inspiron 8500 Owner'S Manual Download Page 56

Page: 56 / 186

Using Batteries and Module Bay Devices

www

.dell.com | support.dell.com

Pull the device out of the module bay.

NOTICE:

Insert devices into the module bay before you dock and turn on the

computer.

Insert the new device into the bay, and push the device until you feel a

click.

Replace the device screw.

Turn on the computer.

Removing and Installing Devices While

the Computer Is Running

NOTE:

If the device

screw is not installed, you
can remove and install
devices while the
computer is running and
connected to a docking
device (docked).

Your computer ships with an optical drive installed in the module bay.
However, the device screw is not installed in the optical drive but packaged
separately. When you install your device in the module bay, you can install
the device screw.

Summary of Contents for Inspiron 8500



























































































































































































Search results

Summary of Contents for Inspiron 8500

Reviews:

Related manuals for Inspiron 8500

Brands by name

Popular brands

Dell Inspiron 8500, Owner'S Manual

Search results

Summary of Contents for Inspiron 8500

Reviews:

Related manuals for Inspiron 8500

Brands by name

Popular brands