Dell Inspiron 8500 Owner'S Manual Download Page 132

Page: 132 / 186

132

Adding and Replacing Parts

www

.dell.com | support.dell.com

Ground yourself by touching a metal connector on the back of the

computer, and continue to do so periodically during this procedure.

Turn the computer over, and loosen the captive screw from the Mini

PCI card/modem cover.

If a modem is not already installed, go to step 10. If you are replacing a

modem, remove the existing modem:

Remove the screws securing the modem to the system board, and

set it aside.

Pull straight up on the attached pull-tab to lift the modem out of

its connector on the system board, and disconnect the modem

cable.

captive screw

Mini PCI card/modem cover

Summary of Contents for Inspiron 8500



























































































































































































Search results

Summary of Contents for Inspiron 8500

Reviews:

Related manuals for Inspiron 8500

Brands by name

Popular brands

Dell Inspiron 8500, Owner'S Manual

Search results

Summary of Contents for Inspiron 8500

Reviews:

Related manuals for Inspiron 8500

Brands by name

Popular brands