Dell Inspiron 8500 Owner'S Manual Download Page 131

Page: 131 / 186

Adding and Replacing Parts

131

Replace the cover and tighten the screw.

Adding a Modem

If you ordered the optional modem at the same time that you ordered your
computer, Dell installed the modem for you.

CAUTION: Before working inside your computer, read the safety

instructions at the front of this guide (see page 11).

NOTICE:

Handle components and cards by their edges, and avoid touching

pins and contacts.

Ensure that the work surface is flat and clean to prevent scratching the

computer cover.

Save and close any open files, exit any open programs, and shut down

the computer (see page 42).

If the computer is docked, undock it.

Disconnect the computer from the electrical outlet.

Wait 10 to 20 seconds and then disconnect any attached devices.

Remove any installed PC Cards, batteries, and devices.

Mini PCI card

antenna

cables (2)

Summary of Contents for Inspiron 8500



























































































































































































Search results

Summary of Contents for Inspiron 8500

Reviews:

Related manuals for Inspiron 8500

Brands by name

Popular brands

Dell Inspiron 8500, Owner'S Manual

Search results

Summary of Contents for Inspiron 8500

Reviews:

Related manuals for Inspiron 8500

Brands by name

Popular brands