Dell IDRAC6, User Manual

Page: 110 / 472

110
Configuring iDRAC6 Enterprise Using the Web Interface
Timeout Enter the maximum time (in seconds) to wait for Active
Directory queries to complete.
Domain Controller
Server Address1–3 Enter the IP address or the fully qualified domain name
(FQDN) of the Domain Controllers.
NOTE:
Configuration of at least one of the 3 Domain Controller
addresses is required. iDRAC6 attempts to connect to each of
the configured addresses in order until a successful
connection is made. If Extended Schema is selected, the
addresses represent the domain controllers where iDRAC6
device object and the Association objects are located. If
Standard Schema is selected, the addresses represent the
domain controllers where the user accounts and the role
groups are located.
Step 3 of 4 Active Directory Configuration and Management
Extended Schema
Settings Select this option if you want to use Extended Schema with
Active Directory.
Click Next to display the Step 4 of 4 Active Directory
Configuration and Management page.
iDRAC Name : Specifies the name that uniquely identifies
the iDRAC in Active Directory. This value is NULL by
default.
iDRAC Domain Name : The DNS name (string) of the
domain where the Active Directory iDRAC object resides.
This value is NULL by default.
These settings will be displayed only if the iDRAC has been
configured for use with an Extended Active Directory
Schema.
Table 5-23. Active Directory Configuration Settings (continued)
Setting Description