manualshive.com logo in svg

Dell IDRAC6, User Manual

Share
Download
Dell IDRAC6 User Manual Download Page 410

410

iDRAC6 Enterprise Property Database Group and Object Definitions

cfgUserAdminUserName (Read/Write)

Legal Values

String. Maximum length = 16

Default

(blank)

Description

The name of the user for this index. The user index is created by writing a 
string into this name field if the index is empty. Writing a string of double 
quotes ("") deletes the user at that index. You cannot change the name. 
You must delete and then recreate the name. The string must not contain / 
(forward slash), \ (backslash), . (period), @ (at symbol) or quotation marks.

 

NOTE: 

This property value must be unique among user names.

cfgUserAdminPassword (Write Only)

Legal Values

A string of up to 20 ASCII characters.

Default

(blank)

Description

The password for this user. User passwords are encrypted and cannot be seen 
or displayed after the property is written.

The user may login to RAC, 
access virtual media, and access 
console redirection.

0x00 0x00 0x00000080 = 
0x000000C1

Table B-2.

Sample Bit Masks for User Privileges 

(continued)

User Privilege(s)

Privilege Bit Mask

Summary of Contents for IDRAC6

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands