manualshive.com logo in svg

Dell IDRAC6, User Manual

Share
Download
Dell IDRAC6 User Manual Download Page 456

456

Glossary

GPIO

Abbreviation for general purpose input/output.

GRUB

Acronym for GRand Unified Bootloader, a new and commonly-used Linux loader.

GUI

Abbreviation for graphical user interface, which refers to a computer display 
interface that uses elements such as windows, dialog boxes, and buttons as 
opposed to a command prompt interface, in which all user interaction is displayed 
and entered in text.

hardware log

Records events generated by iDRAC6 and the CMC.

iAMT

Intel

®

 Active Management Technology — Delivers more secure systems 

management capabilities whether or not the computer is powered up or turned 
off, or the operating system is not responding.

ICMB

Abbreviation for Intelligent enclosure Management Bus.

ICMP 

Abbreviation for Internet control message protocol.

ID

Abbreviation for identifier, commonly used when referring to a user identifier 
(user ID) or object identifier (object ID).

iDRAC6

Acronym for integrated Dell Remote Access Controller 6, the integrated 
System-on-Chip monitor/control system for the Dell 11G PowerEdge™ servers.

IP

Abbreviation for Internet Protocol, which is the network layer for TCP/IP. 
IP provides packet routing, fragmentation, and reassembly.

IPMB

Abbreviation for intelligent platform management bus, which is a bus used in 
systems management technology.

Summary of Contents for IDRAC6

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands