Dell IDRAC6, User Manual

Page: 301 / 472

Using iDRAC6 Configuration Utility
301
Alert Destination 1 if LAN Alert Enabled is set to On , enter the IP address where
PET LAN alerts will be forwarded.
IPv4 Settings Enable or disable support for the IPv4 connection.
IPv4 Select Enabled or Disabled IPv4 protocol support.
The default is enabled.
RMCP+ Encryption
Key Press <Enter> to edit the value and <Esc> when finished.
The RMCP+ Encryption key is a 40-character hexadecimal
string (characters 0-9, a-f, and A-F). RMCP+ is an IPMI
extension that adds authentication and encryption to IPMI.
The default value is a string of 40 0s (zeros).
IP Address Source Select between DHCP and Static . When DHCP is selected,
the Ethernet IP Address , Subnet Mask , and Default Gateway
fields are obtained from a DHCP server. If no DHCP server is
found on the network, the fields are set to zeros.
When Static is selected, the Ethernet IP Address , Subnet
Mask , and Default Gateway items become editable .
Ethernet IP Address If the IP Address Source is set to DHCP , this field displays the
IP address obtained from DHCP.
If the IP Address Source is set to Static , enter the IP address
you want to assign to iDRAC6.
The default is 192.168.0.120 .
Subnet Mask If the IP Address Source is set to DHCP , this field displays the
subnet mask address obtained from DHCP.
If the IP Address Source is set to Static , enter the subnet mask
for iDRAC6. The default is 255.255.255.0 .
Default Gateway If the IP Address Source is set to DHCP , this field displays the
IP address of the default gateway obtained from DHCP.
If the IP Address Source is set to Static , enter the IP address of
the default gateway. The default is 192.168.0.1 .
DNS Servers from
DHCP Select On to retrieve DNS server addresses from a DHCP
service on the network. Select Off to specify the DNS server
addresses below.
Table 19-1. LAN Parameters (continued)
Item Description