manualshive.com logo in svg

Dell IDRAC6, User Manual

Share
Download
Dell IDRAC6 User Manual Download Page 267

Using the RACADM Command Line Interface

267

modified. If an index is not present, the first available index is used. 
This method allows flexibility when adding indexed entries where you do 
not need to make exact index matches between all the RACs being 
managed. New users are added to the first available index. A configuration 
file that parses and runs correctly on one iDRAC6 may not run correctly on 
another if all indexes are full and you must add a new user.

Modifying iDRAC6 IP Address in a Configuration File

When you modify iDRAC6 IP address in the configuration file, remove all 
unnecessary 

<

variable

>

=<

value

> entries. Only the actual variable group’s 

label with "[" and "]" remains, including the two 

<

variable

>

=<

value

> 

entries pertaining to the IP address change.

For example:

#

#   Object Group 

"

cfgLanNetworking

"

#

[cfgLanNetworking]

cfgNicIpAddress=10.35.10.110

cfgNicGateway=10.35.10.1

This file will be updated as follows:

#

#   Object Group 

"

cfgLanNetworking

"

#

[cfgLanNetworking]

cfgNicIpAddress=10.35.9.143

# comment, the rest of this line is ignored

cfgNicGateway=10.35.9.1

Summary of Contents for IDRAC6

























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands