Dell C3760DN Color Laser Page 349 User Manual Download

Page: 349 / 412

Removing Options

347

Removing Options

If the printer location needs to change or the printer and print media handling options need to be shipped to a new

location, all print media handling options must be removed from the printer. For shipping, pack the printer and print

media handling options securely to avoid damage.

NOTE:

The images used in this manual are those of the Dell™ C3760dn Color Laser Printer unless otherwise mentioned.

Removing the Optional Memory Module

WARNING:

When you remove the optional memory module, be sure to turn off the printer, unplug the power cable, and

disconnect all cables from the back of the printer before starting these tasks.

Ensure that the printer is turned off.

Turn the screw on the left side cover counterclockwise.

Slide the left side cover towards the back of the printer.

Open the left side cover completely.

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Search results

Summary of Contents for C3760DN Color Laser

Reviews:

Related manuals for C3760DN Color Laser

Brands by name

Popular brands

Dell C3760DN Color Laser, User Manual

Search results

Summary of Contents for C3760DN Color Laser

Reviews:

Related manuals for C3760DN Color Laser

Brands by name

Popular brands