Dell C3760DN Color Laser Page 127 User Manual Download

Page: 127 / 412

Dell™ Printer Configuration Web Tool

125

Copy Printer Settings

Use the

Copy Printer Settings

menu to copy the printer settings to another printer or printers on the network by

typing the IP address of each printer.

NOTE:

You must log in as an administrator to use this feature.

Print Volume

Use the

Print Volume

menu to check the history of printing, such as paper usage, the types of jobs being printed,

limit to which users can use the color mode, and the maximum number of pages they can print.

Printer Information

Use the

Printer Information

menu to get information on service calls, inventory reports, or the status of current

memory and engine code levels.

Tray Settings

Use the

Tray Settings

menu to get information about the paper type and size for each tray.

E-Mail Alert

Use the

E-Mail Alert

menu to receive e-mail when the printer needs supplies or intervention. To be notified, type

your name or the name of the key operator in the e-mail list box.

Set Password

Use the

Set Password

menu to lock the

Dell Printer Configuration Web Tool

with a password so that other users do

not inadvertently change the printer settings that you have selected.

NOTE:

You must log in as an administrator to use this feature.

Online Help

Click

Online Help

to visit the Dell Support website.

Order Supplies at:

www.dell.com/supplies

Contact Dell Support at:

support.dell.com

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Search results

Summary of Contents for C3760DN Color Laser

Reviews:

Related manuals for C3760DN Color Laser

Brands by name

Popular brands

Dell C3760DN Color Laser, User Manual

Search results

Summary of Contents for C3760DN Color Laser

Reviews:

Related manuals for C3760DN Color Laser

Brands by name

Popular brands