Dell C3760DN Color Laser Page 267 User Manual Download

Page: 267 / 412

Understanding Your Printer Software

265

Printer Status Image Area

Displays the image of printer condition.

• Estimated Toner Level image

Displays the estimated toner level of each color if the printer is functioning properly.

NOTE:

If the utility does not receive a response from the printer, the Unknown toner image is displayed.

• Printer error image

Displays an indication image when an error occurs.

An error has occurred and the printer cannot be used.

Order Supplies button

Click this button to display the

Order

window.

To hide the

Order

window, click

Order

Supplies

again.

Info (i) button

Click this button to open

Preferences

NOTE:

The info (i) button appears on the lower-right corner of the window when the cursor is over the Printer Status window.

The info (i) button is a standard used across all widgets.

Order Window

This window provides you with the information for ordering printer supplies by telephone or from the web site.
To open the

Order

window:

Click

Order Supplies

in the

Printer Status

window.

The

Order

window appears.

NOTE:

The Order window appears when low toner is detected.

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Search results

Summary of Contents for C3760DN Color Laser

Reviews:

Related manuals for C3760DN Color Laser

Brands by name

Popular brands

Dell C3760DN Color Laser, User Manual

Search results

Summary of Contents for C3760DN Color Laser

Reviews:

Related manuals for C3760DN Color Laser

Brands by name

Popular brands