manualshive.com logo in svg

Dell C3760DN Color Laser, User Manual, Page: 208 / 412

Share
Download
Dell C3760DN Color Laser User Manual Download Page 208

206

Understanding the Printer Menus

Report 2 Sided Print

 

NOTE: 

Report 2 Sided Print feature is available only for Dell C3760dn Color Laser Printer.

Purpose:

To specify to print reports on both sides a sheet of paper.  

Values:

Print ID

Purpose:

To specify a location where the user ID is printed. 

Values:

 

NOTE: 

When printing on DL size paper, a part of the user ID may not be printed correctly.

Print Text

Purpose:

To specify whether the printer outputs PDL data, which is not supported by the printer, as text when the printer 

receives it. Text data is printed on A4 or Letter size paper.

Values:

Banner Sheet

Purpose:

To specify the position of banner sheet, and also specify the tray in which the banner sheet is loaded. 

Values:

1 Sided

*

Prints reports on one side of a sheet of paper.

2 Sided

Prints reports on both side of a sheet of paper.

Off

*

Does not print the user ID.

Top Left

Prints the user ID on the top left of the page.

Top Right

Prints the user ID on the top right of the page.

Bottom Left

Prints the user ID on the bottom left of the page.

Bottom Right

Prints the user ID on the bottom right of the page.

Off

Does not print the received data.

On

*

Prints the received data as text data.

Insert Position

Off

*

Does not print the banner sheet.

Front

Inserted before the first page of every copy.

Back

Inserted after the last page of every copy.

Front & Back

Inserted before the first page of every copy and after the last page of every 

copy.

Specify Tray

MPF

The banner sheet is loaded in the MPF.

Tray 1

*

The banner sheet is loaded in tray1.

Tray 2

*1

The banner sheet is loaded in the optional 550-sheet feeder.

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Reviews:

No comments