Dell C3760DN Color Laser Page 78 User Manual Download

Page: 78 / 412

Loading Paper

Before loading the print media, flex the sheets and fan them. Straighten the edges of the stack on a level surface.

Load the print media into the tray with the recommended print side facing up.

NOTE:

Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.

Align the width guides against the edges of the paper.

NOTE:

When loading user-specified print media, adjust the width guides and slide the extendable part of the tray by

pinching the length guide and sliding it until it rests lightly against the edge of the paper.

After confirming that the guides are securely adjusted, insert the tray into the printer.

NOTE:

If the front side of the tray is extended, the tray protrudes when it is inserted into the printer.

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Search results

Summary of Contents for C3760DN Color Laser

Reviews:

Related manuals for C3760DN Color Laser

Brands by name

Popular brands

Dell C3760DN Color Laser, User Manual

Search results

Summary of Contents for C3760DN Color Laser

Reviews:

Related manuals for C3760DN Color Laser

Brands by name

Popular brands