Dell C3760DN Color Laser, User Manual, Page: 88 / 412

86
Installing Printer Drivers on Windows
®
Computers
16
Click Finish .
Windows 8, Windows 8 64-bit Edition, or Windows Server 2012
1 Extract the zip file you downloaded to your desired location.
2
Under Desktop mode, right-click the bottom left corner of the screen, and then click Control Panel .
3 Click Hardware and Sound ( Hardware for Windows Server 2012) → Devices and Printers → Add a printer .
4 Click Have Disk to display the Install From Disk dialog box.
5
Click Browse , and then select the extracted folder in step 1.
6 Click OK .
7 Select your printer name and click Next .
8
To change the printer name, enter the printer name in the Printer name box, and then click Next . Installation
starts.
9 If you do not share your printer, select Do not share this printer . If you share your printer, select Share this printer
so that others on your network can find and use it . Click Next .
10 As the driver installation is completed, click Print a test page to print a test page. To use this printer as the default
printer, select the Set as the default printer check box.
11
Click Finish .
Use the Dell Printer Configuration Web Tool to monitor the status of your network printer without leaving your
desk. You can view and/or change the printer settings, monitor toner level, and acknowledge the timing of ordering
replacement consumables. You can click the Dell supplies link for ordering supplies.
NOTE:
The
Dell Printer Configuration Web Tool
is not available when the printer is directly connected to a computer or a print
server.
To launch the Dell Printer Configuration Web Tool , type the printer's IP address in your web browser. The printer
configuration appears on the screen.
You can set up the
Dell Printer Configuration Web Tool to send you an e-mail when the printer needs supplies or
intervention.
To set up e-mail alerts:
1 Launch the Dell Printer Configuration Web Tool .
2 Click E-Mail Alert link.
3 Under E-Mail Server Settings , enter the Primary SMTP Gateway , Reply Address , and your or key operator's e-mail
address in the e-mail list box.
4 Click Apply New Settings .
NOTE:
Connection pending until printer sends an alert
is displayed on the SMTP server until an error occurs.
Network Printer Setup on a Remote Network
Before Installation
Before you start remote installation, perform the following procedures.
Allow Print Spooler to Accept Client Connections
NOTE:
This procedure is required for Windows XP 64-bit Edition, Windows Server 2003, Windows Server 2003 x64 Edition,
Windows Vista, Windows Vista 64-bit Edition, Windows Server 2008, Windows Server 2008 64-bit Edition, Windows Server 2008
R2, Windows 7, and Windows 7 64-bit Edition.
For Windows XP, Windows Server 2003, Windows Vista, and Windows Server 2008: