manualshive.com logo in svg

Dell C3760DN Color Laser, User Manual, Page: 74 / 412

Share
Download
Dell C3760DN Color Laser User Manual Download Page 74

72

Setting the IP Address

3

Press the 

 button until 

Network

 is highlighted, and then press the 

 

(Set)

 button.

4

Press the 

 button until 

TCP/IP

 is highlighted, and then press the 

 

(Set)

 button.

5

Press the 

 button until 

IPv4

 is highlighted, and then press the 

 

(Set)

 button.

6

Press the 

 button until 

Get IP Address

 is highlighted, and then press the 

 

(Set)

 button.

7

Press the 

 button until 

Panel

 is highlighted, and then press the 

 

(Set)

 button.

 

NOTE: 

If the message 

This Setting Becomes Effective after Restart

 is displayed, press the 

 

(Back)

 button.

8

Press the 

 

(Back)

 button.

9

Press the 

 button until 

IP Address

 is highlighted, and then press the 

 

(Set)

 button.

The cursor is located at the first octet of the IP address.

10

Use the number pad to enter the first octet of the IP address, and then Press the 

 button.

The cursor moves to the next digit.

 

NOTE: 

You can only enter one octet at a time and must press the 

 button after entering each octet.

11

Enter the rest of the octets, and then press the 

 

(Set)

 button.

 

NOTE: 

If the message 

This Setting Becomes Effective after Restart

 is displayed, press the 

 

(Back)

 button.

12

Press the 

 

(Back)

 button.

13

Press the 

 button until 

Subnet Mask

 is highlighted, and then press the 

 

(Set)

 button.

14

Repeat steps 11 and 12 to set Subnet Mask.

 

NOTE: 

If the message 

This Setting Becomes Effective after Restart

 is displayed, press the 

 

(Back)

 button.

15

Press the 

 

(Back)

 button.

16

Press the 

 button until 

Gateway Address

 is highlighted, and then press the 

 

(Set)

 button.

17

Repeat steps 11 and 12 to set the Gateway Address.

18

Turn off the printer and then turn it on again.

When Using the Tool Box

1

Click 

Start

→

 

All Programs

→

 

Dell Printers

→

 

Dell C3760 Color Laser Printer

→

 

Tool Box

.

 

NOTE: 

For details about starting the Tool Box, see "Starting the Tool Box."

The 

Tool Box

 opens.

2

Click the 

Printer Maintenance

 tab.

3

Select 

TCP/IP Settings

 from the list at the left side of the page.

The 

TCP/IP Settings

 page appears.

4

Select the mode from 

IP Address Mode

, and then enter the values in IP Address, Subnet Mask, and Gateway 

Address.

5

Click 

Apply New Settings

 to take effect.

You can also assign the IP address to the printer when installing the printer drivers with the installer. When you use the 

Network Installation

 feature, and the 

Get IP Address

 is set to 

AutoIP

 or 

DHCP

 on the printer, you can set the IP 

address from 0.0.0.0 to the desired IP address on the printer selection window. 

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Reviews:

No comments