Dell C3760DN Color Laser User Manual Download Page 271

Page: 271 / 412

Understanding Your Printer Software

269

Printer Status Window

When the printer is specified in the

Printer Selection

window, the

Printer Status

window appears.

Printer Status Message Area

Displays a message of the current printer status.

NOTE:

The Status Monitor Console automatically obtains the printer information at the updated interval that can be specified in

the Settings window. Also, the printer status is refreshed when the Refresh is clicked.

NOTE:

If the Status Monitor Console receives no response from the printer, the message Cannot get printer information is

displayed.

Printer Status Image Area

• Current Toner Status icons

Displays icons of the current status of each toner.

The toner level is more than 30%.
The toner level is less than 29%.
The toner level is less than 9%.
The toner level is unknown.

• Estimated Toner Level images

Keeps you informed about the amount of toner that remains for each color.

Toner Alert

Displays an alert message when any remaining toner is low, empty, or unknown.

Order Online

•

Order Supplies Online

button

Click this button to access the web site for ordering Dell printer supplies. This button appears when the amount

of toners becomes less than 30%.

Refresh button

Click this button to update the status of the printer.

Close button

Click this button to close the

Printer Status

window.

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Search results

Summary of Contents for C3760DN Color Laser

Reviews:

Dell C3760DN Color Laser, User Manual, Page: 271 / 412

Search results

Summary of Contents for C3760DN Color Laser

Reviews: