manualshive.com logo in svg

Dell C3760DN Color Laser, User Manual, Page: 123 / 412

Share
Download
Dell C3760DN Color Laser User Manual Download Page 123

Dell™ Printer Configuration Web Tool

121

14

Dell™ Printer Configuration Web Tool

Overview

 

NOTE: 

This web tool is available only when the printer is connected to a network using an Ethernet cable or the wireless printer 

adapter.

 

NOTE: 

The images used in this manual are those of the Dell C3760dn Color Laser Printer unless otherwise mentioned.

One of the features of the 

Dell Printer Configuration Web Tool

 is E-Mail Alert Setup, which sends e-mail to you or 

the key operator when the printer needs supplies or intervention. 

To fill out printer inventory reports requiring the asset tag number of all the printers in your area, use the 

Printer 

Information

 feature in the 

Dell Printer Configuration Web Tool

. Enter the IP address of each printer on the 

network to display the asset tag number. 
The 

Dell Printer Configuration Web Tool

 feature also allows you to change the printer settings and keep track of 

printing trends. If you are a network administrator, you can copy the printer settings to one or all printers on the 

network using your web browser.

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Reviews:

No comments