manualshive.com logo in svg

Dell C3760DN Color Laser, User Manual, Page: 132 / 412

Share
Download
Dell C3760DN Color Laser User Manual Download Page 132

130

Dell™ Printer Configuration Web Tool

Printer Status

Use the 

Printer Status

 menu to check the status of consumables, hardware, and specifications of the printer.

The following pages are displayed in the 

Printer Status

 menu.

Printer Status

Purpose:

To check the status of the consumables, trays, and covers.

Values:

"Print Server Settings"

"Security"

"Set Password"
"Authentication System"
"Kerberos Server"
"LDAP Server"
"LDAP Authentication"
"SSL/TLS"
"IPsec"
"802.1x"

*3

"IP Filter (IPv4)"

"Copy Printer Settings"

"Copy Printer Settings"

"Copy Printer Settings"
"Copy Printer Settings Report"

"Print Volume"

"Print Volume"

"Print Volume"
"Dell ColorTrack"

"Tray Settings"

"Tray Settings"

*1

This item is available only when RAM Disk is enabled with the optional 512MB memory module installed or the optional hard disk is 
installed.

*2

This item is available only when the printer is connected using the wireless network.

*3

This item is available only when the printer is connected using an Ethernet cable. 

Cyan Toner Cartridge
Magenta Toner Cartridge
Yellow Toner Cartridge
Black Toner Cartridge

OK

Indicates that there is enough amount of toner for use.

Replace Soon

Indicates that the toner needs to be replaced soon.

Replace Now

Indicates that the toner needs to be replaced now.

Consumables

Status

OK

Indicates that the status of the drum cartridge and/or waste toner 

box is OK for use. 

Replace Soon

Indicates that the drum cartridge and/or waste toner box needs to be 

replaced soon. 

Replace Now

Indicates that the drum cartridge and/or waste toner box needs to be 

replaced now.

Paper Trays

Status

OK

Indicates that there is some paper in the tray but the quantity is 

unknown.

Add Paper

Indicates that there is no paper in the tray.

Capacity

Displays the maximum capacity of the paper tray.

Size

Displays the size of paper in the tray.

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Reviews:

No comments