Dell C3760DN Color Laser User Manual Download Page 133

Page: 133 / 412

Dell™ Printer Configuration Web Tool

131

Printer Events

Purpose:

When faults occur, such as

Out of Paper

Cover is open

, the details of all alerts or indications of faults are displayed

in the

Printer Events

page.

Values:

Printer Information

Purpose:

To verify the printer details such as the hardware configuration and software version. This page can also be displayed

by clicking on the

Printer Information

tab in the left frame.

Values:

Printer Jobs

The

Printer Jobs

menu contains information on the

Job List

and

Completed Jobs

pages. These pages show the

details of the status regarding each print job.

Job List

Purpose:

To confirm the jobs that are being processed. Click the

Refresh

button to update the screen.

Values:

Output Tray

Status

Indicates that the tray is available.

Full

Indicates that the tray is not available.

Capacity

Displays the maximum capacity of the paper tray.

Cover

Status

Closed

Indicates that the cover is closed.

Open

Indicates that the cover is open.

Printer Type

Displays the type of the printer.

Color Laser

is displayed normally.

Printing Speed

Displays the printing speed.

Location

Displays the location where a fault occurred.

Details

Displays the details of the fault.

Dell Service Tag Number

Displays Dell service tag number.

Express Service Code

Displays Dell express service code.

Asset Tag Number

Displays the asset tag number of the printer.

Printer Serial Number

Displays the serial number of the printer.

Memory Capacity

Displays the memory capacity.

Hard Disk*

Displays information on the printer's hard disk.

Processor Speed

Displays the processing speed.

Printer Revision Levels

Firmware Version

Displays the revision date (revision level).

Network Firmware Version

Displays the revision date (revision level).

This item is available only when the optional hard disk drive is installed.

Displays the job ID.

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Search results

Summary of Contents for C3760DN Color Laser

Reviews:

Dell C3760DN Color Laser, User Manual, Page: 133 / 412

Search results

Summary of Contents for C3760DN Color Laser

Reviews: