manualshive.com logo in svg

Dell C3760DN Color Laser, User Manual, Page: 217 / 412

Share
Download
Dell C3760DN Color Laser User Manual Download Page 217

Understanding the Printer Menus

215

Secure Settings

Use the 

Secure Settings

 menu to set a password to limit access to the menus. This prevents items from being 

changed accidentally.

 

NOTE: 

Values marked by an asterisk (*) are the factory default menu settings.

See also:

"Panel Lock"

Panel Lock

Purpose:

To set a limited access to 

Admin Settings

 with a password, and to set or change the password. 

Values:

Function Enabled

 

NOTE: 

Function Enabled feature is available only when 

Panel Lock Control

 is set to 

Enable

.

Purpose:

To specify whether to enable or disable each of the printer functions, or to require a password to use the functions.

Values:

Data Encryption

 

NOTE: 

Data Encryption feature is available only when the optional hard disk is installed.

Purpose:

To disable or enable data encryption when using the printer.

Values:

Panel Lock Control

Disable

*

Disables password protection for 

Admin Settings

.

Enable

Enables password protection for 

Admin Settings

.

Change Password

*1

0000

–

9999

Sets or changes the password required to access 

Admin Settings

.

*1

This item is available only when 

Panel Lock Control

 is set to 

Enable

.

USB Direct Print

On

*

Enables the USB Direct Print function.

On (Password)

Enables the USB Direct Print function, but requires a password.

On (Color 

Password)

Enables the USB Direct Print function with a color mode, but requires a 

password.

Off

Disables the USB Direct Print function.

Change Password

*1

Changes the password that is set under the 

Function Enabled

 menu. 

*1

This item is available only when 

On (Password)

 or 

On (Color Password)

 is enabled.

Encryption

Off

*

Disables encryption of the data.

On

Enables encryption of the data.

Encryption Key

Sets a key that is required for encryption.

Summary of Contents for C3760DN Color Laser





























































































































































































































































































































































































































Reviews:

No comments