Datalogic AV7000 Reference Manual Download Page 210

Page: 210 / 337

AV7000 LINEAR CAMERA REFERENCE MANUAL

198

4.7.11 Diagnostics | Scope (Calibration Check)

Use the

Scope (Calibration Check)

window to view a software oscilloscope of the

camera/illumination performance.

NOTE

: Scope functionality will enable

Calibration

Mode

and disable normal camera functionality.

For practical use of the Scope for verifying the function of the focusing mechanism,

see

section 7.2.

To access the Scope (Calibration Check) window:

1. In the menu tree under Diagnostics, click Scope (Calibration Check). The

Scope

(Calibration Check)

window opens.

2. To zoom, click on the right and left sides of the area to be zoomed, and then click Zoom

to.

3. Use the sliders at the bottom of the screen to adjust Height (Focus) and Speed

(Amplitude).

4. Click

Stop Acquiring

to freeze the scope.

Summary of Contents for AV7000


















































































































































































































































































































































Search results

Summary of Contents for AV7000

Reviews:

Related manuals for AV7000

Brands by name

Popular brands

Datalogic AV7000, Reference Manual

Search results

Summary of Contents for AV7000

Reviews:

Related manuals for AV7000

Brands by name

Popular brands