Datalogic AV7000 Reference Manual Download Page 197

Page: 197 / 337

E-GENIUS

185

4.7.1 Diagnostics | System Status

Use the System Status to get an overview of how your system is running.
To access the System Status window:

1. In the menu tree under

Diagnostics

, click

System Status

. The

System Status

window

opens.

2. From the System Status window, the following information is available:

Tunnel/Array Statistics
Belt
Speed(mm/s)

Shown in millimeters per second.

Belt
Speed(fpm)

Shown in feet per minute.

Total
Packages

Package count since last reset.

Good Reads

Number of good packages read since last reset.

Summary of Contents for AV7000


















































































































































































































































































































































Search results

Summary of Contents for AV7000

Reviews:

Related manuals for AV7000

Brands by name

Popular brands

Datalogic AV7000, Reference Manual

Search results

Summary of Contents for AV7000

Reviews:

Related manuals for AV7000

Brands by name

Popular brands