DataCard ImageCard Magna, User Manual

Page: 96 / 180

5-24
Troubleshooting
User’s Guide for Magna™ Platinum Series™ Printers
Figure 5-5: Prepare the printer for packaging
5 Secure the print ribbon cartridge. Leave the print ribbon cartridge in place or apply
packing tape. See Figure 7-3 for the location of the tape. Avoid applying tape to
labels in the printer.
6 Place the packaging support on the printer cover (step 3 in Figure 5-5). If the
packaging support is not available, place bubble wrap or crumpled newspaper
between the inside of the printer and cover, so that the cover will be slightly raised
when you close it.
7 Make sure all other supply cartridges are secured in place.
8 Close the cover.
9 Use the original shipping carton, plastic bag, and shipping support wrap.
10 Place the plastic bag around the printer and close it.
11 Open the shipping support wrap. Place the printer in the wrap so the foam will
touch three sides of the printer (step 1 in Figure 5-6). (The foam runners are on
the outside of the wrap and under the printer.)
12 Close the shipping support wrap around the printer (steps 2 and 3 in Figure 5-6).
The top flaps must be closed in the correct sequence. Tape the wrap in place.
1
3
2