4-18
Maintaining the printer
User’s Guide for Magna™ Platinum Series™ Printers
The notches on the printhead cartridge should align with the notches on the
spring bar (A in
Figure 4-20
).
Figure 4-20: Secure the printhead cartridge
6
Hold the printhead cartridge latch lever down (step 1 in
Figure 4-20
) and pivot the
printhead cartridge down toward the swing arm (step 2 in
Figure 4-20
). Release
the latch lever when the printhead cartridge is in place.
7
Clean the printhead. Move the cleaning pen back and forth along the length of the
printhead edge. (See
Figure 4-15 on page 4-15
.) Be sure to completely clean the
rounded edge of the printhead.
8
Close the swing arm, pressing it down until the push latch clicks into place.
9
Close the printer cover.
If the printer has a locking cover, lock the cover after closing it.
10 Power on the printer.
11 Print a card to verify the quality of printing. You can print a sample card or a card
using your card creation application. If card quality is still inadequate, see
“Troubleshooting” on page 5-1
.
♦
i
1
2
A
i
Summary of Contents for ImageCard Magna
