DataCard ImageCard Magna, User Manual

Page: 101 / 180

Before you install
6-3
User’s Guide for Magna™ Platinum Series™ Printers
Selecting the site
After meeting general requirements, the site for the Magna printer should meet the
electrical, physical, and environmental requirements of the printer.
Environmental requirements
The Magna printer requires the following environmental conditions for optimal
operation:
•
Operating relative humidity: 20% to 80% non-condensing
•
Operating temperature range: 55° F to 95° F (13° C to 35° C)
The maximum operating temperature might be different from the recommended
storage temperature.
If you store the Magna printer, provide an environment with the following conditions:
•
Storage relative humidity: 20% to 80% non-condensing
•
Storage temperature range: 0° F to 100° F (-17.8° C to 37.8° C)
Remove all supplies from the printer before storing.
Electrical requirements
The Magna printer requires the following electrical conditions for optimal performance:
•
100-230 VAC (+/- 10%) at 50/60 Hz (The Magna printer automatically adjusts to
any power within this range.)
•
Single phase, 3-wire grounded receptacle only
The rated input current for the Magna printer is 3 amps at 100 VAC applied.
Physical requirements
The Magna printer requires an environment that accommodates its physical
dimensions and weight.
The printer weighs between 35 and 46 pounds or 15.9 and 20.9 kilograms. The weight
varies depending on the options installed in the printer.
The surface holding the printer might also need to bear the weight of other
equipment such as a PC and camera.
The dimensions are:
•
Width of 29.5 inches (74.9 cm) for printers without a laminator module
•
Width of 36.5 inches (92.7 cm) for printers with a laminator module
•
Depth of 11 inches (27.9 cm)
•
Height of 12 inches (30.5 cm)
Do not block the back, left- and right-side air vents or fan opening on the Magna
printer.
i
i