Data I/O PSV5000, Owner'S Manual

Page: 144 / 176

Maintenance ■ Tape Output System Maintenance
- 140 - Data I/O ■ 096-0465-001C
Your PSV5000 System will continue to operate as normal on the
backup drive. However, the failed drive must be replaced for
continued safety.
After the failed drive is identified and replaced, the message on-screen
will read REBUILDING. After it has rebuilt, the next time you start up it
will read NORMAL.
Contact Data I/O Support or your nearest Data I/O representative.
Figure 81: The RAID solid state hard drives are inside the Handler
PC case. The Handler PC must be removed to access the RAID
backup drives. In image B, the Handler PC cover has been
removed: this image is a representation only for reference.
Tape Output System Maintenance
The Tape Output System is an optional system for placing and taping
programmed devices into device tape.
Items not covered here can be found in the TM-50 Taping Module User’s
Guide that came with your PSV5000 System.
Cleaning the Pressure Seal
The Pressure Seal Tape Output System requires cleaning to prevent
problems with breaking the device tape or tearing the tape sprocket
holes. Cleaning removes build up from the cover tape application rollers
and the drive sprocket top pressure idler wheel.
C
LEANING
T
OOLS
R
EQUIRED
•
Dry or damp shop towel
•
A reel of empty device tape (carrier tape)
•
A reel of cover tape
B