13-16 RS-FF Operand R
Array [8]
Select the reset input. The reset input takes priority over the set
input.
Option:
Function:
[25]
Comparator 3
[26]
Logic rule 0
[27]
Logic rule 1
[28]
Logic rule 2
[29]
Logic rule 3
[30]
SL Time-out 0
[31]
SL Time-out 1
[32]
SL Time-out 2
[33]
Digital input DI18
[34]
Digital input DI19
[35]
Digital input DI27
[36]
Digital input DI29
[37]
Digital input DI32
[38]
Digital input DI33
[39]
Start command
[40]
Drive stopped
[41]
Reset Trip
[42]
Auto Reset Trip
[43]
OK Key
[44]
Reset Key
[45]
Left Key
[46]
Right Key
[47]
Up Key
[48]
Down Key
[50]
Comparator 4
[51]
Comparator 5
[60]
Logic rule 4
[61]
Logic rule 5
[70]
SL Time-out 3
[71]
SL Time-out 4
[72]
SL Time-out 5
[73]
SL Time-out 6
[74]
SL Time-out 7
[75]
Start command given
[76]
Digital input x30/2
[77]
Digital input x30/3
[78]
Digital input x30/4
[80]
No Flow
[81]
Dry Pump
[82]
End of Curve
[83]
Broken Belt
[90]
ECB Drive Mode
[91]
ECB Bypass Mode
[92]
ECB Test Mode
[93]
Emergency Mode
[94]
RS Flipflop 0
[95]
RS Flipflop 1
[96]
RS Flipflop 2
[97]
RS Flipflop 3
13-16 RS-FF Operand R
Array [8]
Select the reset input. The reset input takes priority over the set
input.
Option:
Function:
[98]
RS Flipflop 4
[99]
RS Flipflop 5
[100]
RS Flipflop 6
[101]
RS Flipflop 7
[102]
Verifying Flow
[103]
Relay 1
[104]
Relay 2
[105]
Relay 3
[106]
Relay 4
[107]
Relay 5
[108]
Relay 6
[109]
Relay 7
[110]
Relay 8
[111]
Relay 9
[112]
System On Ref
[125]
Digital input x46/1
[126]
Digital input x46/3
[127]
Digital input x46/5
[128]
Digital input x46/7
[129]
Digital input x46/9
[130]
Digital input x46/11
[131]
Digital input x46/13
[140]
ATEX ETR cur. warning
[141]
ATEX ETR cur. alarm
[142]
ATEX ETR freq. warning
[143]
ATEX ETR freq. alarm
3.12.4 13-2* Timers
Use the result (true or false) from timers directly to define
an event (see
parameter 13-51 SL Controller Event
), or as
boolean input in a logic rule (see
parameter 13-42 Logic Rule Boolean 2
, or
parameter 13-44 Logic Rule Boolean 3
). A timer is only false
when started by an action (for example
[29] Start timer 1
)
until the timer value entered in this parameter has elapsed.
Then it becomes true again.
All parameters in this parameter group are array
parameters with index 0–2. Select index 0 to program
timer 0, select index 1 to program timer 1, and so on.
Parameter Description
Programming Guide
MG20OB02
Danfoss A/S © 05/2018 All rights reserved.
121
3
3
Summary of Contents for VLT AQUA Drive FC 202
Page 2: ......