0-71 Date Format
Option:
Function:
[0] YYYY-MM-DD
Sets the date format to be used in the LCP.
[1] DD-MM-YYYY
Sets the date format to be used in the LCP.
[2] MM/DD/YYYY Sets the date format to be used in the LCP.
0-72 Time Format
Option:
Function:
Sets the time format to be used in the LCP.
[0]
24 h
[1]
12 h
0-73 Time Zone Offset
Range:
Function:
0 min
*
[-780 - 780
min]
Enter the time zone offset relative to
UTC. This parameter is required for the
automatic daylight saving time
adjustment.
0-74 DST/Summertime
Option:
Function:
Select how to handle daylight saving time/summer
time. For manual setting of DST/summer time,
enter the start date and end date in
parameter 0-76 DST/Summertime Start
and
parameter 0-77 DST/Summertime End
[0]
*
Off
[2]
Manual
0-76 DST/Summertime Start
Range:
Function:
Size
related
*
[ 0 - 0 ] Sets the date and time when DST/
summer time starts. The date is
programmed in the format selected in
parameter 0-71 Date Format
.
0-77 DST/Summertime End
Range:
Function:
Size
related
*
[ 0 - 0 ] Sets the date and time when DST/
summer time ends. The date is
programmed in the format selected in
parameter 0-71 Date Format
.
0-79 Clock Fault
Option:
Function:
Enables or disables the clock warning when the
clock has not been set, or has been reset due to a
power-down and no back-up is installed. If VLT
®
Analog I/O Option MCB 109 is installed,
[1] Enabled
is default.
[0] Disabled
[1] Enabled
0-81 Working Days
Array [7]
Array with 7 elements [0]–[6] shown below the parameter
number in the display. Press [OK] and step between elements
with [
▲
] and [
▼
].
Option: Function:
Set for each weekday if it is a working day or a non-
working day. First element of the array is Monday. The
working days are used for timed actions.
[0] No
[1] Yes
0-82 Additional Working Days
Array [5]
Array with 5 elements [0]–[4] shown below the parameter
number in the display. Press [OK] and step between elements
with [
▲
] and [
▼
].
Range:
Function:
Size related
*
[ 0 - 0 ] Defines dates for additional working days
that would normally be non-working
days according to
.
0-83 Additional Non-Working Days
Array [15]
Array with 15 elements [0]–[14] shown below the parameter
number in the display. Press [OK] and step between elements
with [
▲
] and [
▼
].
Range:
Function:
Size related
*
[ 0 - 0 ] Defines dates for additional working days
that would normally be non-working
days according to
.
0-84 Time for Fieldbus
Range:
Function:
0
*
[0 - 4294967295 ]
Shows the time for fieldbus.
0-85 Summer Time Start for Fieldbus
Range:
Function:
0
*
[0 - 4294967295 ] Shows the summer time start for
fieldbus.
0-86 Summer Time End for Fieldbus
Range:
Function:
0
*
[0 - 4294967295 ] Shows the summer time end for fieldbus.
Parameter Description
VLT
®
AQUA Drive FC 202
38
Danfoss A/S © 05/2018 All rights reserved.
MG20OB02
3
3
Summary of Contents for VLT AQUA Drive FC 202
Page 2: ......
