Danfoss VLT AQUA Drive FC 202, Programming Manual

Page: 37 / 294

0-37 Display Text 1
Range: Function:
0
*
[0 -
25 ] In this parameter, it is possible to write an individual
text string to be shown in the LCP or to be read via
serial communication.
To show the text permanently, select [37] Display Text
1 in 1 of the following parameters:
•
Parameter 0-20 Display Line 1.1 Small .
•
Parameter 0-21 Display Line 1.2 Small .
•
Parameter 0-22 Display Line 1.3 Small .
•
Parameter 0-23 Display Line 2 Large .
•
Parameter 0-24 Display Line 3 Large .
•
Parameter 0-37 Display Text 1 .
Changing parameter 12-08 Host Name changes
parameter 0-37 Display Text 1 - but not the opposite
way.
0-38 Display Text 2
Range: Function:
0
*
[0 -
25 ] In this parameter, it is possible to write an individual
text string to be shown in the LCP or to be read via
serial communication.
To show the text permanently, select
[38] Display Text
2
in:
•
Parameter 0-20 Display Line 1.1 Small
.
•
Parameter 0-21 Display Line 1.2 Small
.
•
Parameter 0-22 Display Line 1.3 Small
.
•
Parameter 0-23 Display Line 2 Large
.
•
Parameter 0-24 Display Line 3 Large
.
Press [
▲
] or [
▼
] to change a character. Press [
◀
] and
[
▶
] to move the cursor. When a character is
highlighted by the cursor, this character can be
changed. A character can be inserted by placing the
cursor between 2 characters and pressing [
▲
] or [
▼
].
0-39 Display Text 3
Range: Function:
0
*
[0 -
25 ] In this parameter, it is possible to write an individual
text string to show in the LCP or to be read via
serial communication. To show the text permanently,
select display text 3 in
parameter 0-20 Display Line
1.1 Small , parameter 0-21 Display Line 1.2 Small ,
parameter 0-22 Display Line 1.3 Small ,
parameter 0-23 Display Line 2 Large , or
parameter 0-24 Display Line 3 Large . Press [
▲
] or [
▼
]
to change a character. Press [
◀
] and [
▶
] to move the
cursor. When a character is highlighted by the
cursor, this character can be changed. A character
can be inserted by placing the cursor between 2
characters and pressing [
▲
] or [
▼
].
3.2.5 0-4* LCP Keypad
Enable, disable, and password protect individual keys on
the LCP.
0-40 [Hand on] Key on LCP
Option: Function:
[0] Disabled Select to disable the key.
[1]
*
Enabled [Hand On] key is enabled.
[2] Password Avoid unauthorized start in hand-on
mode. If
parameter 0-40 [Hand on] Key on
LCP is included in My Personal Menu ,
define the password in
parameter 0-65 Personal Menu Password .
Otherwise, define the password in
parameter 0-60 Main Menu Password .
[3] Enabled without
OFF
[4] Password
without OFF
[5] Enabled with
OFF
[6] Password with
OFF
[9] Enabled, ref = 0
0-41 [Off] Key on LCP
Option: Function:
[0] Disabled Select to disable the key.
[1]
*
Enabled [Off] key is enabled.
[2] Password Avoid unauthorized stop. If parameter 0-41 [Off]
Key on LCP is included in My Personal Menu ,
define the password in parameter 0-65 Personal
Menu Password . Otherwise, define the password
in parameter 0-60 Main Menu Password .
0-42 [Auto on] Key on LCP
Option: Function:
[0] Disabled Select to disable the key.
[1]
*
Enabled [Auto On] key is enabled.
[2] Password Avoid unauthorized start in auto-on mode. If
parameter 0-42 [Auto on] Key on LCP is included
in My Personal Menu , define the password in
parameter 0-65 Personal Menu Password .
Otherwise, define the password in
parameter 0-60 Main Menu Password .
Parameter Description Programming Guide
MG20OB02 Danfoss A/S © 05/2018 All rights reserved. 35
3 3