DANA SPICER Axle 123, Service Manual

Page: 66 / 236

66
ASSEMBLY
Dana Holding Corporation ASM-0007E - 123 Axle Service Manual
ASSEMBLY
FIGURE 11: Lubricate the outer surface of the new sealing
ring (13) and fit it onto the cover (5) using tool T2 (See drawing
T2 p. 72) .
FIGURE 12: Using tool T3 (See drawing T3 p. 72), insert the
thrust blocks of bearing (4)(16).
FIGURE 13: Introduce a spacer (15) and thicker calibrated
spacer between bearings. Reset the depth gauge on pinion
bearings (4)(16) and pinion spacer arranged (15) as in the fi-
gure above.
T2
5
13
T3
4 16
15
4
A
FIGURE 14: Using a surface plate, position the pinion sup-
port (5) on the outer bearing (16) and then insert the outer be-
aring (4) in the pinion support (5).
FIGURE 15: Arrange accurately the pinion bearings.
FIGURE 16: Insert depth gauge “DDG” into pinion support (5)
and measure variation “H” in relation to the zero setting per-
formed back at Figure 13.
H = 1,8 mm
16
5
4
B
5
Property of American Airlines