DANA SPICER Axle 123, Service Manual

Page: 30 / 236

30
ASSEMBLY
Dana Holding Corporation ASM-0007E - 123 Axle Service Manual
ASSEMBLY
FIGURE 24: Lubricate and fit the seal ring (5) and guide ring(6)
onto tool T1 (See drawing T1 p. 33); install the rings into the
arm.
FIGURE 25: Pay particular attention to the direction of as-
sembly of the rings.
FIGURE 26: Position the lower part of tool T2 (See drawing
T2 p. 34) and the thrust block of the external bearing (13).
5
T1
6
5
Oil Side Oil Side
Sealing Ring Sealing Ring Guide Ring Guide Ring
13
T2
FIGURE 27: Lubricate the seats of the bearings and position
the hub (10) on tool T2 (See drawing T2 p. 34); position the
thrust block of the internal bearing (8).
NOTE:
Check that the thrust block is correctly oriented.
FIGURE 28: Fit the bearing (8) and seal ring (7) into the inter-
nal thrust block.
FIGURE 29: Using special tool T3 (See drawing T3 p. 35) ap-
ply a repositionable jointing compound for seals to the outer
surface of the sealing ring (7). Position the sealing ring (7) in
the hub (10).
NOTE:
Check that the ring (7) is correctly oriented.
T2
10
8
7
8
T3
Property of American Airlines