DANA SPICER Axle 123, Service Manual

Page: 31 / 236

ASSEMBLY
31 Dana Holding Corporation ASM-0007E - 123 Axle Service Manual
FIGURE 30: Install the wheel hub.
FIGURE 31: Install the external bearing (13).
NOTE:
Move the bearing to the limit stop by hammering lightly all
around the edge.
FIGURE 32: Install the crown wheel (23).
13
23
FIGURE 33: Fit the complete crown flange (23).
NOTE:
In order to fasten the flange (23), use a plastic hammer
and alternately hammer on several equidistant points.
FIGURE 34: Install the security flange (26).
Using Tecno Lube /101, grease the surface of the safety flan-
ge (26) that touches the crown wheel.
FIGURE 35: Coat the nuts (27) with Loctite 242 and tighten in
two stages, using the criss-cross method.
Initial torque wrench setting: 330 N·m
Final torque wrench setting: 385 N·m
Tecno Lube/101
26
27
Loctite 242
330 - 385 N
·
m
Property of American Airlines