DANA SPICER Axle 123, Service Manual

Page: 119 / 236

ASSEMBLY
31 Dana Holding Corporation ASM-0029E - 223 Axle Service Manual
ASSEMBLY
FIGURE 5: Lubricate the terminal of the u-joint and install the
steering case (1).
Pay attention not to damage the dust cover rings and the se-
aling rings.
FIGURE 6: Prepare a series of shims (3) of 0,85 mm to be as-
sembled under the upper pin (4).
FIGURE 7: Fit a new seal (3) onto the top articulation pin (4).
Lubricate and install the unit in the steering case.
Position the screws (8) and tighten to 140 N·m.
Check the correct assembly side of the seal (3).
1
0,85 mm
3
4
upper articulation pin
4
3
140 N·m
FIGURE 8: Lubricate the unit and the steering case.
FIGURE 9: Fit the unit (19) in the steering case (1). Position
the screws (15) and tighten securely.
Check for the correct assembly side of the seal (10).
FIGURE 10: Tighten the new capscrews (15) of the top and
bottom articulation pins in sequence using the criss-cross
method.
Torque wrench setting: 140 N·m
under articulation pin
10
1
19
12
15
140 N·m
Property of American Airlines