DANA SPICER Axle 123, Service Manual

Page: 159 / 236

ASSEMBLY
71 Dana Holding Corporation ASM-0029E - 223 Axle Service Manual
FIGURE 30: Fit the complete differential unit in a vice and
tighten the screws (24) holding the two half boxes together to
a torque of 80 N·m.
Tighten screws using the criss-cross method.
FIGURE 31: Install the spacer (42) and the ring gear (6).
FIGURE 32: Mount the ring gear (6) and fasten it to the diffe-
rential box with screws (4).
Use only new screws.
24
80 N·m
CAUTION
6
42
4
Loctite 270
CAUTION
FIGURE 33: Lock the ring gear (6) by tightening the screws (4)
to a torque of 150 N·m using the criss-cross method.
FIGURE 34: INSTALLATION OF THE DIFFERENTIAL UNIT
Position the differential unit under a press and, using a driver
with an adequate diameter, install the first bearing (3).
FIGURE 35: Turn the unit upside down and install the second
bearing (25).
Pay particular attention; position a shim with adequate dia-
meter in order to engage the internal ring of bearing without
engaging the cage.
150 N·m
100°
3
100°
25
CAUTION
Property of American Airlines