DANA SPICER Axle 123, Service Manual

Page: 108 / 236

20
ASSEMBLY
Dana Holding Corporation ASM-0029E - 223 Axle Service Manual
ASSEMBLY
FIGURE 20: Fit the bushing (18) in the steering case (3) using
tool T2 (See drawing T2 p. 24).
FIGURE 21: Apply a coat of AREXONS rubber cement to the
outer metal surface of the snap ring (17).
Position the seal ring and, using tool T3 (See drawing T3
p. 25), fit it in the appropriate seat.
Check direction of installation carefully.
FIGURE 22: Position the wheel hub (7) under a press; lubri-
cate the outer seat of bearing and, using tool T4 (See drawing
T4 p. 26), install the thrust block of bearing (16).
18
T2
17
17
T3
CAUTION
7
16
7
T4
FIGURE 23: Install bearing (16).
Apply Arexons seal rubber cement to the outer surface of seal
ring (15).
Position the seal ring (15) in the hub (7).
Check ring orientation carefully.
FIGURE 24: Position tool T5 (See drawing T5 p. 27) and press
the seal ring (15) into its seat.
FIGURE 25: Turn the hub over (7), lubricate bearing seat and,
using tool T4 (See drawing T4 p. 26) install the bearing thrust
block (8).
7
16
16
15
15
CAUTION
15
15
T5
7
7
8
T4
Property of American Airlines