DANA SPICER Axle 123, Service Manual

Page: 101 / 236

13 Dana Holding Corporation ASM-0029E - 223 Axle Service Manual
SAFETY PRECAUTIONS
1 - During all operations described in this manual, the axle should be fastened onto a trestle, while the other parts
mentioned should rest on supporting benches.
2 -
When removing one of the arms, an anti-tilting safety trestle should be placed under the other arm.
3 - When working on an arm that is fitted on the machine, make sure that the supporting trestles are correctly po-
sitioned and that the machine is locked lengthways.
4 -
Do not admit any other person inside the work area; mark off the area, hang warning signs and remove the igni-
tion key from the machine.
5 - Use only clean, quality tools; discard all worn, damaged, lowquality or improvised wrenches and tools. Ensure
that all torque wrenches have been checked and calibrated.
6 -
Always wear gloves and non-slip rubber shoes when performing repair work.
7 - Should you stain a surface with oil, remove marks straight away.
8 -
Dispose of all lubricants, seals, rags and solvents once work has been completed. Treat them as special waste
and dispose of them according to the relative law provisions obtaining in the country where the axles are being
overhauled.
9 - Make sure that only weak solvents are used for cleaning purposes; avoid using turpentine, dilutants and toluol,
xylolbased or similar solvents; use light solvents such as Kerosene, mineral spirits or water-based, environment
friendly solvents.
10 -
For the sake of clarity, the parts that do not normally need to be removed have not been reproduced in some
of the diagrams.
11 - After repair work has been completed, accurately touch up any coated part that may have been damaged.
12 -
Follow all safety instructions in the Original Equipment Manufacturer (OEM) manual that came with the vehicle.
Property of American Airlines