DANA SPICER Axle 123, Service Manual

Page: 67 / 236

ASSEMBLY
67 Dana Holding Corporation ASM-0007E - 123 Axle Service Manual
FIGURE 17: Heat the inner bearing (16) to about 212 F° [100
C°] and fit it to the pinion (18).
FIGURE 18: Deviation “H” must be added to a set value of
0,10 mm to obtain calibrated shim “S1” (14) for insertion
between inner bearing cone (4) and spacer (15).
Dimension “S1” must be rounded off to the higher 5/100.
EXAMPLE: S1=H+X= 1,8 + 0,1 = 1,9 mm
FIGURE 19: Insert spacer (15) and two calibrated spacers
“S1” (14).
100°
16
18
19
S1=H+X H= A-B X = fi x value 0,10 mm
15
14
FIGURE 20: Oil seal ring lips.
FIGURE 21: Insert the cover (5).
FIGURE 22: Heat the outer bearing (2) to about 212 F° [100
C°] and fit into the pinion (1).
5
100°
5
4
Property of American Airlines