![background image](http://html1.mh-extra.com/html/daikin/super-multi-nx-c-series/super-multi-nx-c-series_service-manual_3794977136.webp)
SiE12-411
Instruction
System Configuration
125
"
To operate the remote control
•
To use the remote control, aim the transmitter at the indoor
unit. If there is anything to block signals between the unit
and the remote control, such as a curtain, the unit will not
operate.
•
Do not drop the remote control. Do not get it wet.
•
The maximum distance for communication is about 7 m.
"
To fix the remote control holder on the wall
1. Choose a place from where the signals reach the unit.
2. Fix the holder to a wall, a pillar, etc. with the screws
supplied with the holder.
3. Place the remote control in the remote control holder.
ATTENTION
Receiver
"
About remote control
•
Never expose the remote control to direct sunlight.
•
Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft
cloth.
•
Signal communication may be disabled if an electronic-starter-type fluorescent lamp (such as
inverter-type lamps) is in the room. Consult the shop if that is the case.
•
If the remote control signals happen to operate another appliance, move that appliance to
somewhere else, or consult the shop.
S
et.
To remove, p
u
ll it
u
pw
a
rd
s
.
Remote control
holder
Summary of Contents for Super Multi NX C-Series
