![background image](http://html1.mh-extra.com/html/daikin/super-multi-nx-c-series/super-multi-nx-c-series_service-manual_3794977145.webp)
Instruction
SiE12-411
134
System Configuration
Notes on flap and louvres angles
"
To adjust the vertical blades (louvres)
•
When adjusting the louvre, use a robust and
stable stool and watch your steps carefully.
Hold the knob and move the louvres.
(You will find a knob on the left side and the
right side blades.)
•
Unless [SWING] is selected, you should set the
flap at a near- horizontal angle in COOL or DRY
mode to obtain the best performance.
•
In COOL or DRY mode, if the flap is fixed at a
downward position, the flap automatically moves in
about 60 minutes to prevent condensation on it.
"
ATTENTION
•
Always use a remote control to adjust the flap
angle.
If you attempt to move it forcibly with hand when it
is swinging, the mechanism may be broken.
•
Be careful when adjusting the louvres. Inside the
air outlet, a fan is rotating at a high speed.
DRY
COOL
FAN
HEAT
Summary of Contents for Super Multi NX C-Series
