manualshive.com logo in svg

Daikin ALTHERMA, Installer'S Reference Manual

Discover the power of Daikin ALTHERMA, a cutting-edge heating system designed to provide unparalleled comfort. Achieve optimal performance with the help of our comprehensive user manual, available for free download on our website. Quick and easy access to the manual ensures you make the most of this remarkable product.

Share
Download
background image

15

 | 

Troubleshooting

Installer reference guide

234

EBLA09~16DA + EDLA09~16DA

Daikin Altherma 3 M

4P620241-1 – 2020.06

15 Troubleshooting

In this chapter

15.1

Overview: Troubleshooting .................................................................................................................................................... 234

15.2

Precautions when troubleshooting........................................................................................................................................ 234

15.3

Solving problems based on symptoms................................................................................................................................... 235
15.3.1

Symptom: The unit is NOT heating or cooling as expected .................................................................................. 235

15.3.2

Symptom: Hot water does NOT reach the desired temperature ......................................................................... 235

15.3.3

Symptom: The compressor does NOT start (space heating or domestic water heating) .................................... 236

15.3.4

Symptom: The system is making gurgling noises after commissioning................................................................ 236

15.3.5

Symptom: The pump is blocked............................................................................................................................. 237

15.3.6

Symptom: The pump is making noise (cavitation) ................................................................................................ 237

15.3.7

Symptom: The pressure relief valve opens ........................................................................................................... 238

15.3.8

Symptom: The water pressure relief valve leaks................................................................................................... 238

15.3.9

Symptom: The space is NOT sufficiently heated at low outdoor temperatures .................................................. 239

15.3.10

Symptom: The pressure at the tapping point is temporarily unusually high ....................................................... 240

15.3.11

Symptom: Tank disinfection function is NOT completed correctly (AH-error) .................................................... 240

15.4

Solving problems based on error codes................................................................................................................................. 240
15.4.1

To display the help text in case of a malfunction.................................................................................................. 241

15.4.2

Error codes of the unit ........................................................................................................................................... 241

15.1 Overview: Troubleshooting

This chapter describes what you have to do in case of problems.

It contains information about:

▪

Solving problems based on symptoms

▪

Solving problems based on error codes

Before troubleshooting

Carry out a thorough visual inspection of the unit and look for obvious defects such
as loose connections or defective wiring.

15.2 Precautions when troubleshooting

WARNING

▪

When  carrying  out  an  inspection  on  the  switch  box  of  the  unit,  ALWAYS  make
sure that the unit is disconnected from the mains. Turn off the respective circuit
breaker.

▪

When  a  safety  device  was  activated,  stop  the  unit  and  find  out  why  the  safety
device  was  activated  before  resetting  it.  NEVER  shunt  safety  devices  or  change
their values to a value other than the factory default setting. If you are unable to
find the cause of the problem, call your dealer.

DANGER: RISK OF ELECTROCUTION

WARNING

Prevent  hazards  due  to  inadvertent  resetting  of  the  thermal  cut-out:  power  to  this
appliance  MUST  NOT  be  supplied  through  an  external  switching  device,  such  as  a
timer, or connected to a circuit that is regularly turned ON and OFF by the utility.

Summary of Contents for ALTHERMA

























































































































































































































































































Reviews:

No comments

Related manuals for ALTHERMA

Daikin FXMQ07PBVJU Operation Manual preview
FXMQ07PBVJU
Brand: Daikin Pages: 7
Daikin FXDQ15P7VEB Operation Manual preview
FXDQ15P7VEB
Brand: Daikin Pages: 8
Trion Air Boss T1001 Module Installation And Operation Manual preview
Air Boss T1001 Module
Brand: Trion Pages: 22
commercial cool CPD10XCL User Manual preview
CPD10XCL
Brand: commercial cool Pages: 36
iTrack EGO Series Installation, Operation And Maintenance Manual preview
EGO Series
Brand: iTrack Pages: 18
Kooltronic K2A4C5NP36L Operator'S Manual preview
K2A4C5NP36L
Brand: Kooltronic Pages: 13
BOMANN CL 6049 CB Instruction Manual preview
CL 6049 CB
Brand: BOMANN Pages: 74
Eco-De ECO-698 User Manual preview
ECO-698
Brand: Eco-De Pages: 47
King Industrial KAC-410 Instruction Manual preview
KAC-410
Brand: King Industrial Pages: 6
SystemAir AxZent Series Installation And Operating Instructions Manual preview
AxZent Series
Brand: SystemAir Pages: 72
Ozone Solutions OMZ-1000-HF Operation And Maintenance Instructions preview
OMZ-1000-HF
Brand: Ozone Solutions Pages: 4
Master Bilt Cold Wall Evaporator Open Front Milk Coolers OMC Series Specifications preview
Cold Wall Evaporator Open Front Milk Coolers OMC Series
Brand: Master Bilt Pages: 2
Shark HE600 Series Owner'S Manual preview
HE600 Series
Brand: Shark Pages: 7
Carrier 48HJD005 Product Data preview
48HJD005
Brand: Carrier Pages: 76
nilan Compact P User Manual preview
Compact P
Brand: nilan Pages: 48
Fral Super Cool FSC16SC User Manual preview
Super Cool FSC16SC
Brand: Fral Pages: 43
Carrier GAS FURNACE 58MVP Users Information Manual For The Operation And Maintenance preview
GAS FURNACE 58MVP
Brand: Carrier Pages: 10
Daikin RXF25E5V1B Installer'S Reference Manual preview
RXF25E5V1B
Brand: Daikin Pages: 64

Brands by name

Popular brands

Load more brands