D-Link D-View 6 Professional, User Manual, Page: 89 / 143

To configure Device Events:
1. Go to System > Event Manager > Device Event Config . The Event
Configuration screen displays.
Figure 80: Event Configuration screen
2. Select a Device Group or a Device Name .
3. Select the Type of event. The different events are:
TRAP INDICATION
Up -> Down The link between the device and the workstation
(D-View) is disconnected.
Down -> Up The link between device and the workstation is
connected.
Cold Start Device sends Cold Start trap message when the
device is powered off/on.
Warm Start Device sends Warm Start trap message when
the device has been rebooted.
Link Down Device sends Link Down trap message when the
status of an attached communication interface
has changed from up to down.
Link Up Device sends Link Up trap message when the
status of an attached communication interface
has changed from down to up.
Device
Authentication Fail Device sends Authentication Fail trap when the
agent received a request from an unauthorized
manager.
EGP Fail In routers running the Exterior Gateway
Protocol (EGP), an EGP Neighbor has changed
to a down state.