D-Link D-View 6 Professional User Manual Download Page 65

Page: 65 / 143

ULTI

VENDOR

UPPORT

Only the following modules can be used by third-party devices:

•

GenSNMPDeviceModule:

D-View recognizes SNMP enabled devices

irrespective of device type, vendor and model number. Refer to

Retrieving

OID of the device

for more information.

•

MIB Browser/Compiler:

The MIB compiler translates the MIB from its

normal ASN.1 format to a format that is comprehensible by other
applications. Refer to

Managing Devices with MIB Compiler

for more

information.

•

Telnet, Web management tools:

Refer to

Management Methods

for

more information.

•

Monitoring performance status by

ICMP

SNMP

. Refer to

Setting the

Devices to Poll

for more information.

•

Extension of supported device types with

Device Customization

functional module. Refer to

Customizing Devices

for more information.

Summary of Contents for D-View 6 Professional
















































































































































Search results

Summary of Contents for D-View 6 Professional

Reviews:

D-Link D-View 6 Professional, User Manual, Page: 65 / 143

Search results

Summary of Contents for D-View 6 Professional

Reviews: