Cyclades AlterPath ACS, Command Reference Manual

Page: 330 / 420

314
Profile Configuration
Step 4 - Save the configuration.
cli> config savetoflash
Step 5 - Exit the CLI mode.
To exit the CLI mode and return to ACS’s shell, type the following command:
cli> quit
To configure a menu shell
Enter the following command at the prompt.
[root@CAS /]# menush_cfg
The following configuration utility is displayed allowing
you to configure a menu shell for the user.
--------------------------------------
MenuShell Configuration Utility
--------------------------------------
Please choose from one of the following options:
1. Define Menu Title
2. Add Menu Option
3. Delete Menu Option
4. List Current Menu Settings
5. Save Configuration to Flash
6. Quit
Using the CLI interface to configure common parameters
You can configure some of the physical port parameters that were presented in the
previous pages, using the CLI interface.
General State Parameters:
General configurations are under the menu:
cli>config physicalports <'all' or range/list[1-4]> general
Under this menu you can configure the following parameters:
•
alias - To configure an alias to a server connected to the serial port.
•
datasize - This parameter configures the number of bits per character. Valid values
are: 5-8.
•
flow - Set the flow control. Valid values are: none , hard for hardware and soft for
software.