Cyclades AlterPath ACS, Command Reference Manual

Page: 120 / 420

104
Network
Step 3 - Add the following lines to the file /etc/config_files (from factory file
already present in /etc/config_files ):
Step 4 - Add the option “-x” to the factory default content of the file
/etc/network/dhcpcd_cmd :
NOTE:
From the factory, /etc/network/dhcpcd_cmd already has such content.
Step 5 - Add all other necessary options to the file /etc/network/dhcpcd_cmd
(some options are described later in this section).
In both cases if the IP address of the ACS or the default gateway are changed, the
ACS will adjust the routing table accordingly.
/etc/network/dhcpcd_cmd
/etc/dhcpcd-eth0.save
File Description 4.3: /etc/config_files
/sbin/dhcpcd -l 3600 -x -c /sbin/handle_dhcp
File Description 4.4: /etc/network/dhcpcd_cmd